952-649-3165

078-000-033 – EMC CX3-80 SPS Replacement Battery 100809008, 071-000-460

$995.00

(1 customer review)
SKU: 078-000-033 Categories: , Condition: Refurbished

Description

EMC CX3-80 SPS Replacement Battery 100809008 / 078-000-033 / 071-000-460

SPS Pros is dedicated to providing top quality standby power supplies to keep your EMC storage array running smoothly. This particular model with part numbers 100809008 / 078-000-033 / 071-000-460, is used by the EMC CX3-80. This EMC SPS is a 2200W unit compatible with only the EMC CX3-80.

All EMC SPS units are fully refurbished with brand new battery cores and come with a 60 day warranty.

EMC CLARiiON CX3-80 Standby Power Supply (SPS) Replacement Battery 100809008 / 078-000-033 / 071-000-460

As shown in Figure 1, the CX3-80 SPE uses two 2.2-kilowatt SPSs to maintain power to the storage system during a power loss; this allows a full dump of the write cache to a reserved area on the persistent disk. In the case of the CX3-80, SPS power output connectors are used to power the SPE as well as to power the first DAE on the first back-end loop.

EMC CX3-80 SPS Replacement Battery 100809008 / 078-000-033 / 071-000-460

Figure 1. View of CX3-80 Standby Power Supply (SPS)

It is important to cable each SPS so it connects completely to either the A side or the B side. For example, if you are looking at the SPS from the back, they should be configured as follows:

  • SPS on the right: Power-out and sense cables should connect to power supply A and SP A.
  • SPS on the left: Power-out and sense cables should connect to power supply B and SP B.

If an SPS is cabled with the SPS sense cable going to SP A and the power-out cable going to power supply B (or vice versa), error conditions are displayed when the SPS is tested while it is charging.

Additional information

Weight 63 lbs
Dimensions 28 × 8 × 4 in
Condition

Refurbished

Manufacturer

EMC

1 review for 078-000-033 – EMC CX3-80 SPS Replacement Battery 100809008, 071-000-460

  1. Patrick

    As described, worked to replace my failed SPS with an EMC CX3-80. System is running normally again without any issues.

Only logged in customers who have purchased this product may leave a review.

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping